SECURUS/Hardware/Vibration sensor

Vibration sensors for machine monitoring

Vibration sensors measure movement at a machine’s mounting point. Changes may indicate altered condition. SECURUS displays transmitted metrics and reports deviations from your rules so maintenance can investigate.

Advantech

WISE-2410

Vibration sensor for condition monitoring

Monitors pumps, motors, ventilation and air conditioning systems for wear and calculates the characteristic values directly in the sensor. For potentially explosive areas there is the WISE-2410X variant with ATEX and IECEx approval.

Measurement: 3-axis acceleration, ±16 g, 10–1,000 Hz
Characteristic values: Vibration velocity (RMS), acceleration (RMS, peak), displacement, kurtosis, crest factor
Evaluation basis: ISO 10816 according to the manufacturer
Temperature: −20 to +120 °C (at the metal base)
Power supply: 2 × AA battery 3.6 V (Li-SOCl₂)
Battery life: up to 2 years (hourly transmission)
Protection rating: IP66
Ex variant: WISE-2410X: ATEX and IECEx, Zone 2 and Zone 21
Mounting: Threaded stud, magnet or adhesive

Technical datasheet (PDF)

Technical data according to the manufacturer's datasheet, battery life under the stated conditions. All devices shown transmit via LoRaWAN. In addition to these examples, we also use LoRaWAN devices from other manufacturers depending on requirements.

Measure vibration under comparable conditions

Mounting, direction, speed and operating state affect comparisons. Agree with maintenance which metrics are meaningful during normal operation. Machine monitoring can add fault contacts and temperatures.

Relevant use cases

Machine and equipment monitoring

FAQ

Sensor selection questions

Does a vibration sensor predict every failure?

No. It measures certain vibration characteristics, which must be assessed in the context of the machine and its operation.

Which device is right for you?

We select the right device with you, integrate it into SECURUS and deliver it ready for use.

Book a consultation