SECURUS/Hardware/Fall and inactivity sensor

Radar sensor for camera-free fall detection

A radar sensor can report potential fall events and, depending on configuration, inactivity within its coverage area. It is mounted in the room, with no wearable required. SECURUS assigns alerts to the room and responsible team.

Milesight VS373, radar fall detection
Milesight

VS373

Radar fall detection

Ceiling-mounted mmWave radar sensor for detecting potential fall events in suitable resident rooms, bathrooms and care areas. Suitability and coverage are checked on site.

Technology
mmWave radar, camera-free
Mounting
Ceiling, 2.3–3 m height
Detection area
2 × 2 m to 4 × 5 m
Power supply
Power adapter via USB-C (5 V/3 A)
Battery life
not applicable, mains powered via USB-C
Protection rating
IP65
Operating temperature
0 to +50 °C
Dimensions
114 × 84 × 15 mm
Technical datasheet (PDF)

Technical data according to the manufacturer's datasheet, battery life under the stated conditions. All devices shown transmit via LoRaWAN. In addition to these examples, we also use LoRaWAN devices from other manufacturers depending on requirements.

Check coverage and mounting

Check mounting height, layout and obstacles before selection. Fall detection in care facilities needs a test of the complete procedure: detection, notification and response by the relevant shift.

Relevant use cases
FAQ

Sensor selection questions

Does the resident need a wristband?

No. The sensor is installed in the room. Suitability of the detection area is checked on site.

Which device is right for you?

We select the right device with you, integrate it into SECURUS and deliver it ready for use.